- How much space do you need around a toilet UK?
- Are all toilets the same distance from the wall?
- Are baths wasteful?
- What is a bathroom with only a shower called?
- Can a toilet open into a kitchen?
- How much room do you need around a toilet?
- How far off the wall does a toilet need to be?
- Why is the toilet always next to the shower?
- What is the minimum width for a bathroom?
- Does a downstairs toilet add value?
- How much space is needed for a walk in shower?
How much space do you need around a toilet UK?
The minimum size required for a downstairs toilet is probably around 80cm x 140cm, which is what this example is, but could be as little as 70cm x 130cm in some circumstances (assuming only a toilet & hand basin are required).
PS Don’t forget the space taken when the door swings open as well!.
Are all toilets the same distance from the wall?
Toilet Rough In Dimensions: A toilet’s rough-in measurement is the space between the wall behind the toilet and the center of the waste pipe. Standard toilet rough in dimensions are 12 inches but can be anywhere from 10 to 14 inches in some cases.
Are baths wasteful?
Your bath-shower combo is incredibly wasteful. It’s said that baths use less water than showers, and logistically that makes sense — there’s a finite amount of water that fits in your tub, whereas showers (ahem, mine) just keep on flowing.
What is a bathroom with only a shower called?
A half bath is also called a powder room, and it is a room with only two components — usually a toilet and a sink. But other configurations are considered a half bath, and those examples could include a shower and sink, a shower and a toilet, or a toilet and bathtub.
Can a toilet open into a kitchen?
As long as there is a basin where people can wash their hands before returning to the kitchen then one door is sufficient. If there’s no toilet in the new bathroom then it would be more likely to be approved with only one door.
How much room do you need around a toilet?
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.
How far off the wall does a toilet need to be?
Standard drywall is 1/2 inch thick, so the plumber should set the toilet flange at least 15-1/2 inches from the center of the flange to the wall framing. The standard distance from the back wall is 12 inches, or 12-1/2 inches from the center of the flange to the wall framing.
Why is the toilet always next to the shower?
Toilets tend to be next to bathtubs because both of them tend to be in a small room that is kept rather private from the rest of the house and because both of them need to have fairly substantial plumbing in order to operate correctly.
What is the minimum width for a bathroom?
A full bathroom usually requires a minimum of 36 to 40 square feet. A 5′ x 8′ is the most common dimensions of a guest bathroom or a master bathroom in a small house. If you happen to have this standard-sized small bathroom, there are two different layouts you can consider.
Does a downstairs toilet add value?
If you want to add a little more value to your house then you’ll usually be thinking about adding a conservatory or maybe upgrading the kitchen. What you might be surprised to learn though, is that you could add around 5% onto the value of your home by simply installing a downstairs toilet.
How much space is needed for a walk in shower?
Average Walk-In Shower Sizes In fact, the International Residential Code deems 30′ by 30′ as the smallest permissible footprint for a walk-in shower. The National Kitchen and Bath Association recommends a larger size; 36′ by 36′, to be exact. The most common rectangular walk-in shower sizing is 36′ by 48′.